Everything about Elastic Modulus totally explained
An
elastic modulus, or
modulus of elasticity, is the mathematical description of an object or substance's tendency to be deformed elastically (for example, non-permanently) when a
force is applied to it. The elastic modulus of an object is defined as the
slope of its
stress-strain curve in the elastic deformation region:
»
where
λ (lambda) is the elastic modulus;
stress is the force causing the deformation divided by the area to which the force is applied; and
strain is the ratio of the change caused by the stress to the original state of the object. If stress is measured in
pascals, since strain is a unitless ratio, then the units of
λ are pascals as well. An alternative definition is that the elastic modulus is the stress required to cause a sample of the material to double in length. This isn't realistic for most materials because the value is far greater than the yield stress of the material or the point where elongation becomes nonlinear, but some may find this definition more intuitive.
Specifying how stress and strain are to be measured, including directions, allows for many types of elastic moduli to be defined.
The three primary ones are
- Young's modulus (E) describes tensile elasticity, or the tendency of an object to deform along an axis when opposing forces are applied along that axis; it's defined as the ratio of tensile stress to tensile strain. It is often referred to simply as the elastic modulus.
- The shear modulus or modulus of rigidity (G or ) describes an object's tendency to shear (the deformation of shape at constant volume) when acted upon by opposing forces; it's defined as shear stress over shear strain. The shear modulus is part of the derivation of viscosity.
- The bulk modulus (K) describes volumetric elasticity, or the tendency of an object's volume to deform when under pressure; it's defined as volumetric stress over volumetric strain, and is the inverse of compressibility. The bulk modulus is an extension of Young's modulus to three dimensions.
Three other elastic moduli are
Poisson's ratio,
Lamé's first parameter, and
P-wave modulus.
Homogeneous and
isotropic (similar in all directions) materials (solids) have their (linear) elastic properties fully described by two elastic moduli, and one may choose any pair. Given a pair of elastic moduli, all other elastic moduli can be calculated according to formulas in the table below.
Inviscid fluids are special in that they can't support shear stress, meaning that the shear modulus is always zero. This also implies that
Young's modulus is always zero.
Further Information
Get more info on 'Elastic Modulus'.
|
External Link Exchanges
Do you know how hard it is to get a link from a large encyclopaedia? Well we're different and will prove it. To get a link from us just add the following HTML to your site on a relevant page:
<a href="http://elastic_modulus.totallyexplained.com">Elastic modulus Totally Explained</a>
Then simply click through this link from your web page. Our crawlers will verify your link, extract the title of your web page and instantly add a link back to it. If you like you can remove the words Totally Explained and embed the link in article text.
As long as your link remains in place, we'll keep our link to you right here. Please play fair - our crawlers are watching. Your site must be closely related to this one's topic. Any kind of spamming, dubious practises or removing the link will result in your link from us being dropped and, potentially, your whole site being banned. |
